- MISUMI Top Page>
- Automation Components>
- Rotary Power Transmission>
- Timing Belts, Pulleys>
- Timing Pulleys / Idlers>
- Timing belt pulleys / T10 / flanged pulley can be deselected / configurable / aluminium, steel
MISUMI
MISUMI
- MISUMI×Timing Pulleys / Idlers
- MISUMI×Timing Belts, Pulleys
- MISUMI×Rotary Power Transmission
(i)Remark
- Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Data sheet
Unit еxample related to this product
Glass Circuit Board Conveyor
Search for оther еxamples
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TTPM25T10150-A-Y30-Q32-R32-S9-T9
- Drawing / Specifications
- 3D Preview
- Part Numbers
- Catalog
- Technical Information
Type | Belt Width | Material *1 | Surface Treatment | Accessory *1 Set Screws | ||||||
15mm | 20mm | 25mm | 30mm | 40mm | 50mm | Pulley | Flange | |||
T10150 | T10200 | T10250 | T10300 | T10400 | T10500 | |||||
TTPA | ● | ● | ● | ● | ● | ● | A2000 Aluminum Alloy | Aluminum Alloy | Clear Anodize | EN 1.4301 Equiv. |
TTPB | ● | ● | ● | ● | ● | ● | Black Anodize | |||
TTPK | ● | ● | ● | ● | ● | ● | Hard Clear Anodize *2 | |||
TTPN | ● | ● | ● | ● | ● | ● | Electroless Nickel Plating | |||
TTPT | ● | ● | ● | ● | ● | ● | EN 1.1191 Equiv. | EN 1.0330 Equiv. | - | EN 1.7220 Equiv. (Black Oxide) |
TTPM | ● | ● | ● | ● | ● | ● | Black Oxide | |||
TTPP | ● | ● | ● | ● | ● | ● | Electroless Nickel Plating |
Flange is installed, and set screws are included with Shaft Bores P, N and C. *1. The above material and accessory might be changed to the ones equivalent to the originals. *2. Hard Clear Anodize: Film Hardness 300HV ~
Specifications
Part Number | - | Pulley Shape | - | Shaft Bore Specs., I.D. | - | Z | - | J | - | Q | - | R | - | S | - | T | |
(Shaft Bore Specs.: H, P, N, C) | TTPA14T10500 | - | A | - | NK10 | ||||||||||||
(Shaft Bore Specs.: V, F) | TTPA48T10500 | - | B | - | V20 | - | Z38 | - | J23.5 | ||||||||
(Shaft Bore Specs: Y) | TTPA24T10250 | - | A | - | Y25 | - | Q37 | - | R37 | - | S7 | - | T7 |
Part Number | Pulley Shape | Pulley Shape | ||||||||||||||||
Type | Number of Teeth | Type Nominal Width | A | B | ||||||||||||||
Shaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latter | Shaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latter | |||||||||||||||||
H Round Hole | P Round Hole + Tap | N, C Keyway + Tap | V Stepped Hole | Y Both Ends Stepped | H Round Hole | P Round Hole + Tap | N, C Keyway + Tap | V, F Stepped Hole | ||||||||||
V | Z Z-d≥2 | J (0.1mm Increment) | Y | Q, R Q(R)-d≥2 | S, T | V, F | Z Z-d≥2 | J (0.1mm Increment) | ||||||||||
Aluminum TTPA TTPB TTPK TTPNSteel TTPT TTPM TTPP | 12 | T10150 T10200 T10250 T10300 T10400 T10500 | A | 8~19 | 8~18 | 8, 10, NK10, 11~18 | 8~17 | 10~23 | 3.0≤J≤W-3.0 | 8~17 | 10~19 | 3~17 S+T≤W-3 | - | - | - | - | - | - |
14 | A B | 10~27 | 10~26 | 10, NK10, 11~26 | 10~25 | 12~27 | 10~25 | 12~27 | 10~27 | 10~22 | 10, NK10, 11~20 | 10~25 | 12~27 | |||||
15 | 10~28 | 10~26 | 10, NK10, 11~26 | 10~26 | 12~28 | 10~26 | 12~28 | 10~28 | 10~23 | 10, NK10, 11~20 | 10~26 | 12~28 | 3.0≤J≤L-3.0 | |||||
16 | 12~32 | 12~30 | 12~30 | 12~30 | 14~32 | 12~30 | 14~32 | 12~32 | 12~27 | 12~22 | 12~30 | 14~32 | ||||||
18 | 12~37 | 12~30 | 12~30 | 12~35 | 14~37 | 12~35 | 14~37 | 12~36 | 12~30 | 12~25 | 12~34 | 14~36 | ||||||
20 | 12~42 | 12~40 | 12~40 | 12~40 | 14~42 | 12~40 | 14~42 | 12~42 | 12~35 | 12~29 | 12~40 | 14~42 | ||||||
22 | 12~52 | 12~48 | 12~48 | 12~50 | 14~52 | 12~50 | 14~52 | 12~46 | 12~38 | 12~32 | 12~44 | 14~46 | ||||||
24 | 12~59 | 12~50 | 12~50 | 12~57 | 14~59 | 12~57 | 14~59 | 12~56 | 12~46 | 12~40 | 12~54 | 14~56 | ||||||
25 | 12~59 | 12~50 | 12~50 | 12~57 | 14~59 | 12~57 | 14~59 | 12~59 | 12~49 | 12~43 | 12~57 | 14~59 | ||||||
26 | 12~59 | 12~50 | 12~50 | 12~57 | 14~59 | 12~57 | 14~59 | 12~59 | 12~49 | 12~43 | 12~57 | 14~59 | ||||||
28 | 12~67 | 12~57 | 12~50 | 12~65 | 14~67 | 12~65 | 14~67 | 12~66 | 12~56 | 12~48 | 12~64 | 14~66 | ||||||
30 | 12~76 | 12~65 | 12~50 | 12~74 | 14~76 | 12~74 | 14~76 | 12~71 | 12~61 | 12~50 | 12~69 | 14~71 | ||||||
32 | 20~80 | 20~65 | 20~50 | 20~80 | 22~82 | 20~75 | 22~82 | 20~80 | 20~65 | 20~50 | 20~79 | 22~81 | ||||||
34 | 20~80 | 20~65 | 20~50 | 20~80 | 22~92 | 20~75 | 22~92 | 20~80 | 20~65 | 20~50 | 20~80 | 22~86 | ||||||
36 | 20~80 | 20~65 | 20~50 | 20~80 | 22~94 | 20~75 | 22~94 | 20~80 | 20~65 | 20~50 | 20~80 | 22~91 | ||||||
40 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | 20~75 | 22~95 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | ||||||
44 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | 20~75 | 22~95 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | ||||||
48 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | 20~75 | 22~95 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | ||||||
50 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | 20~75 | 22~95 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | ||||||
60 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | 20~75 | 22~95 | 20~80 | 20~65 | 20~50 | 20~80 | 22~95 | ||||||
Shaft Bore Dia. 8, 11, 13, 14, 17, 21~50 are not available for Shaft Bore Spec. C. |
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Plug-in is required for 3D Preview
Part Number |
---|
TTPM25T10150-A-Y30-Q32-R32-S9-T9 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard | RoHS | Belt Width Used (mm) | The Number of Teeth (T) | Pulley Shape | Material | Surface Treatment | Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm) | Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm) | Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm) | Shaft Bore Specifications (Round Hole + Tap) [P] (mm) | Shaft Bore Specifications (Round Hole) [H] (mm) | Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK] | Shaft Bore Specifications (Stepped Hole) [V] (mm) | Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm) | WB |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | - | 10 | 15 | 25 | Shape A | EN 1.1191 Equiv. | Black Oxide | 30 | - | - | - | - | - | - | - | - |
Loading...
Basic information
Type | Timing Pulleys | Belt Type | T10 | Timing Pulleys/Idlers | Pulleys |
---|
Configure
1Suggestion of an applicable part number.
Some specification is not specified yet.
The part number is completed.
Basic Attributes
-
Belt Width Used(mm)
- 15
- 20
- 25
- 30
- 40
- 50
-
The Number of Teeth(T)
- 12
- 14
- 15
- 16
- 18
- 20
- 22
- 24
- 25
- 26
- 28
- 30
- 32
- 34
- 36
- 40
- 44
- 48
- 50
- 60
-
Pulley Shape
- Shape A
- Shape B
-
Material
- EN 1.1191 Equiv.
- Aluminum
- EN AW-2017 Equiv. (Duralumin)
- Aluminum Alloy 2000 series
-
Surface Treatment
- Not Provided
- Black Oxide
- Clear Anodized Aluminum
- Black Anodized Aluminum
- Hard Clear Anodize
- Electroless Nickel Plating
-
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
- 8
- 55
-
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
- 10
- 12
- 15
- 16
- 18
- 19
- 20
-
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
-
Shaft Bore Specifications (Round Hole) [H](mm)
-
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
- 10
-
Shaft Bore Specifications (Stepped Hole) [V](mm)
-
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
-
WB
-
Type
- TTPA□□T10
- TTPB□□T10
- TTPK□□T10
- TTPM□□T10
- TTPN□□T10
- TTPP□□T10
- TTPT□□T10
-
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
[12-30/1mm Unit(s)]
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Rotary axes / machining selectable
MISUMI Shipping Days: 4 Days
-
Cantilever Shafts / shouldered / external thread, ring groove / spanner flat
MISUMI Shipping Days: 3 Days
-
Tensioner Idlers / toothed / MXL, XL / flanged pulley selectable / single bearing, double bearing / aluminium
MISUMI Standard Price : 24.43 € Shipping Days: 6 Days
-
Timing Belts with Attachments / T5 / T10 Type
MISUMI Shipping Days: 12 Days
-
Timing belts / T# / PUR / steel
MISUMI Standard Price : 7.09 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Search for оther еxamples
Tech Support
- Technical Inquiry